425 N. Frontage Rd. Nipomo CA 93444

Natural Stone Source

Tools

Slab

Tile

805.540.7171

Search Site

 

Polishing

Omega Diamond Tools

Wet Polishing Pads

Omega Diamond Red Ripper Sr Stone Router 2HP 110V
$2 995.00

The Omega Diamond Red Ripper Sr Stone Router

 

This model is 2HP and wired for 110V

 

A high performance motor for shaping granite, marble, and other stone countertops. Employs a unique NWS belt drive for greater power, and a hydroplaning base for ease of use.

 

 

Fabrication Tables

Omega Diamond Red Ripper Sr Stone Router 3HP 220V
$3 995.00

The Omega Diamond Red Ripper Sr Stone Router

 

This model is 3HP and wired for 220V

 

A high performance motor for shaping granite, marble, and other stone countertops. Employs a unique NWS belt drive for greater power, and a hydroplaning base for ease of u

 

This variable speed model is manufactured with a solid water-cooled onboard controller that gives the flexibility to tune the bit life and production rate to individual preference. Speed can be adjusted from 0 to 10,000 RPM via the operator-facing controls on the router itself.

 

Waxes

 

Adhesives & Tints

Epoxy

Blue Ripper Sr Rail Saw 2HP 110V

 

If 220 volt power is not available at your location, this is the Blue Ripper Sr rail saw for you.  Built to the same specification as our 3hp saw, and spinning at the same speed of 1750 rpm. This saw works best on 2cm thick materials, multiple passes are often required for 3cm and thicker materials, due to the lack of Horse Power.

 

Included:

Blue Ripper Sr Rail Saw

14" J Slot Granite Blade. This blade is thin & aggressive. (This is the fastest blade we've tested cutting granite so far)

Premium water hose quick disconnect

10ft. water hose with inline ball-valve shut-off

Inline GFCI (Ground Fault Circuit Interrupter)

 

 

 

 

Omega Diamond Blue Ripper Rail Saw SR 2HP 110V
$3 395.00

Bridge Saw Blades

Tile Blades

 

Power Tools

Grinders

Wet Polishers

Omega Diamond Blue Ripper Rail Saw SR 3HP 220V
$3 395.00

Blue Ripper Sr Rail Saw 3HP 220V

 

The 3hp is our work horse. It spins at 1750 RPM allowing for a wide range of blade options. This saw has an amazing cutting speed of up to 10 feet per minute. This saw requires single phase 220volt power, and easy cuts through 3cm thick stone in one pass.

 

Included:

Blue Ripper Sr Rail Saw

14" J Slot Granite Blade. This blade is thin & aggressive. (This is the fastest blade we've tested cutting granite so far)

Premium water hose quick disconnect

10ft. water hose with inline ball-valve shut-off

Inline GFCI (Ground Fault Circuit Interrupter)

 

 

 

 

Omega Diamond Blue Ripper Rail Saw SR 5HP 220V
$3 695.00

Blue Ripper Sr Rail Saw 5HP 220V

 

Water cooled. Fastest cutting portable rail saw on the market today!  Finding that there were no inexpensive, light-weight 5 horse motors available to us, we decided to build our own: this 5HP water-cooled motor is the core of our new 5hp high-speed (3450 RPM) Blue Ripper rail saw. The water that you are already using to cool your blade is fed through custom end-caps manufactured right here in the USA to cool the motor. We incorporated everything we've ever learned in sealing and protecting the motors from the wet environment of sawing stone into these new motors to make sure they provide both the power and the life we demand from our saws.

 

Included:

Blue Ripper Sr Rail Saw

 

 

14" J Slot Granite Blade. This blade is thin & aggressive. (This is the fastest blade we've tested cutting granite so far)

Premium water hose quick disconnect

10ft. water hose with inline ball-valve shut-off

Inline GFCI (Ground Fault Circuit Interrupter)

 

 

 

Submitting Form...

The server encountered an error.

 

Join our Newsletter!

Omega Diamond Blue Ripper Jr. Rail Saw Makita Motor
$1 365.00

Blue Ripper Jr. Rail Saw Makita Saw Motor

 

This powerful, light-weight, portable rail saw makes cutting granite countertops a breeze!

 

Do you need speed, accuracy and quality work at your job site? The Blue Ripper Jr.™ Rail Saw delivers that and much more. Whether in the shop or out on the job site, the Blue Ripper Jr. Rail Saw nails precision work with ease.

 

The Blue Ripper Jr.™ Rail Saw makes full plunge cuts up to 4 cm in depth. By using the rail system there is no need to use gauges, shims, or offset measurements. Your rail is your guide. With this rail

 

 

 system you will have accuracy and smoothness absolutely better, and faster, than by hand.

 

 

 

 

 

Omega Diamond Blue Ripper Jr. Rail Saw Bosch Saw Motor
$1 365.00

Blue Ripper Jr. Rail Saw Bosch Saw Motor

 

This powerful, light-weight, portable rail saw makes cutting granite countertops a breeze!

 

Do you need speed, accuracy and quality work at your job site? The Blue Ripper Jr.™ Rail Saw delivers that and much more. Whether in the shop or out on the job site, the Blue Ripper Jr. Rail Saw nails precision work with ease.

 

The Blue Ripper Jr.™ Rail Saw makes full plunge cuts up to 4 cm in depth. By using the rail system there is no need to use gauges, shims, or offset measurements. Your rail is your guide. With this rail system you will have accuracy and smoothness absolutely better, and faster, than by hand.

 

 

 

 

 

Omega Diamond Blue Ripper Jr. Rail Saw Skil Saw Motor
$1 365.00

Blue Ripper Jr. Rail Saw Skil Saw Motor

 

This powerful, light-weight, portable rail saw makes cutting granite countertops a breeze!

 

Do you need speed, accuracy and quality work at your job site? The Blue Ripper Jr.™ Rail Saw delivers that and much more. Whether in the shop or out on the job site, the Blue Ripper Jr. Rail Saw nails precision work with ease.

 

The Blue Ripper Jr.™ Rail Saw makes full plunge cuts up to 4 cm in depth. By using the rail system there is no need to use gauges, shims, or offset measurements. Your rail is your guide. With this rail system you will have accuracy and smoothness absolutely better, and faster, than by hand.

 

 

 

 

 

Omega Diamond Pitbull BigDog Hydraulic Stone Chiseler
$3 095.00

Omega Diamond Pitbull BigDog Hydraulic Stone Chisler

 

Portable hydraulic stone chiseler, works on most stone types - including engineered stone! Capable of up to 3½ inch (8cm) thick laminated stone! With a pancake compressor!  get to 120psi  and you will have 5 tons of force!

 

With the PitBull BigDog™ Hydraulic Stone Chiseler's 3 inch wide teeth, you can create a perfect edge by overlapping the bites, or you can turn the machine at an angle to create a ragged "mountainous" look. To help create those perfect straight edges, you can clamp a section of angle aluminum on the slab (perhaps with our powerful suction clamps,) and use the guide pins to keep the PitBull BigDog™ Stone Chiseler in perfect alignment for every bite.

 

 

 

Privacy Policy

Terms and Conditions